We’ve detected that you are using an outdated browser. This will prevent you from accessing certain features. Update browser


Well control: deepwater challenges course.

You will learn what to expect as you extend your operations into deep and ultra deepwater.


This five-day International Association of Drilling Contractors (IADC) accredited course focuses on known and potential issues with drill-through equipment in deep and ultra deepwater, such as hydrostatic pressures external to BOPs (blowout preventers). Drawing on knowledge gained from thousands of rig surveys, this seminar covers advanced multiplex and piloted control systems, BOPs, hydraulic connectors, marine risers and riser tensioners from all major manufacturers, together with the latest know-how on planning, maintenance, and routine, including comprehensive emergency procedures. The latest well control equipment developments from the major OEMs (original equipment manufacturers) is explained in detail.

You will learn

You will learn what to expect as you extend your operations into deep and ultra deepwater. Covering both DP (dynamically positioned) and deepwater moored rigs, you'll learn about the latest equipment, systems and procedures that enhance well control safety and reduce downtime. The course will also cover past problems and solutions, so that you can learn from the experiences of others. The practical knowledge gained from this seminar will provide immediate and long-term benefits, allowing you to improve your drilling operations with greater reliability, efficiency and safety while reducing downtime.

The course is led by experienced trainers, all of whom are former subsea supervisors as well as senior drill-through equipment surveyors. All trainers have undergone didactical training to enhance their teaching skills. Classroom delivery includes a comprehensive syllabus, supported by modern PowerPoint presentations, computer animations and videos. During this 5-day course ample time is allowed for discussion, both with the instructor as well as amongst candidates themselves.

Course content

• Safety and building layout • Industry standards
• Seminar basis and definition • Lessons Learned
• Deepwater locations and rigs


BOP control systems, hydraulic and MUX (Multiplex Subsea Control System)
• BOP control system introduction – HPUs (hydraulic power units), control components, accumulators, pods, valves, hoses • Deepwater usable accumulator volume
• Cameron MUX • Gilmore shuttle valve testing
• Accumulators • Alternative systems - SID, MoRPH, piloted hydraulics


BOP stacks and equipment
• Downtime, BOP characteristics and deepwater issues • Hydrostatic head difficulties
• Drill pipe shearing • Gate valve issues
• Hang-off issues


Ram BOPs
• Cameron ram BOPs and locks • Predictive testing - case studies and procedures
• Shaffer® ram BOPs and locks • HPHT (high pressure high temperature)
• Hydril ram BOPs and locks


Annular preventers
• Hydrostatic head issue • Design verification testing
• Pros and cons of closing annular during an EDS (emergency disconnection sequence)


Hydraulic connectors and end connections
• Current deepwater connectors • Hydrostatic head issue
• Operating parameters • C/K connectors
• Connector capacities • Stuck metal gaskets


Marine drilling riser
• Riser downtime issues - welds, cracking, inspections • CAMCHEC TOFD (time of first data sample) riser inspection method
• Different manufacturers' riser load ratings • Proper riser fit-up
• Riser load path fastener inspection • Riser fit-up anomalies


MUX controls
• Understand basic control system components and how they work together as a system • Differences between Cameron, Shaffer® and Hydril control systems
• Basics of deepwater MUX control systems • Review of MUX electronics
• Importance of fluid care/maintenance • Secondary intervention


Wellbore pressure testing with oil-based mud
• Good communication during pressure testing • Safety practices
• Wellbore pressure testing with oil-based mud

Your future development

Upon successful completion of the course, candidates receive a certificate of completion which is accredited by the IADC. The certificate is valid for five years.

This is the last part of the tri-level educational programme of the well control equipment discipline.

Please contact us for other opportunities and training aimed at personal career development.

Suitable for

Those working in the drilling industry involved with operations in waters over 3,000 feet deep.

Prerequisite courses

Our introductory level Drill-through equipment (DTE) course and intermediate level Well control equipment course (WCEC).

Interested in this course?

Not the right course for you?

Hit enter or the arrow to search Hit enter to search

Search icon

Are you looking for?