ShipRight procedures are a comprehensive system of procedures aimed at ensuring high standards of safety, quality and reliability at the design stage and during construction. These procedures also extend, via Linked Supporting Services, to ensure that these standards are met throughout the operational lifetime of the ship.
Additional Design & Construction Procedures (ADP)
These procedures cover various structural issues not dealt with under SDA and FDA.
| ShipRight procedures | Date |
| LR-SR-ADP-001 Comparative Sloshing Assessment of LNG Ship Containment Systems | April, 2005 |
| LR-SR-ADP-002 Approval Scheme for Gas Ship Containment Systems | October, 2006 |
| LR-SR-ADP-003 Guidance notes for liquefied gas carriers adopting IMO Type B independent tanks | October, 2012 |
| LR-SR-ADP-004 Direct Calculations for Special Service Craft of Metallic Construction | August, 2015 |
| LR-SR-ADP-005 Guidelines for CFD Escort Tug Performance | May, 2016 |
| LR-SR-ADP-006 Non-linear Structural Collapse Analysis for Plates and Stiffened Panels | May, 2016 |
| LR-SR-ADP-007 Verification of Primary Structure for Forward Holds of Container Ships | September 2016 |
| LR-SR-ADP-008 LR Code for Unmanned Marine Systems | February, 2017 |
| LR-SR-ADP-009 Approval of Installation of Ballast Water Treatment Systems on LR Classed Ships | September, 2017 |
| LR-SR-ADP-010 Procedure for the Determination of Airborne Noise Emissions from Marine Vessels | January, 2019 |
| LR-SR-ADP-011 Procedure for the Use of Enhanced NDE for Container Ships | December, 2020 |
| LR-SR-ADP-012 Procedure for the Assessment of Container Ship Lashing Bridge Structures | August, 2021 |
| LR-SR-ADP-013 Approval of a Manufacturer according to Quality Assurance Engineering Schemes (QAES) | April, 2022 |
| LR-SR-ADP-014 Procedure for Analysis of Pump Tower and Interfacing Structure | July, 2022 |
| LR-SR-ADP-016 Shipright ADP for underwater radiated noise | March, 2023 |
| LR-SR-ADP-017 Additional Calculation Procedures for Longitudinal Strength | April, 2013 |
| LR-SR-ADP-018 Calculation Procedures for Stress Concentration Factor and Strength Assessment of Hatch Corners | August, 2023 |
| LR-SR-ADP-019 ShaftRight Main Propulsion Shafting Alignment Procedure | July, 2022 |
| LR-SR-ADP-022 ShipRight ADP - Guidance Notes for ShipRight SDA Buckling | January, 2024 |
| LR-SR-ADP-022 Guidelines for the Finite Element Analysis of Type C Tank | January, 2024 |
| LR-SR-ADP-023 ShipRight ADP for Vibration Measurement | January, 2024 |
| LR-SR-ADP-024 Procedure for Assigning DIST Descriptive Note | February, 2024 |
| LR-SR-ADP-025 Procedure for Assigning SRtP Descriptive Note | February, 2024 |
| LR-SR-ADP-026 Procedure for Alternative Method for Calculation of Stress Concentration Factors in the Web Fillet Radii | February, 2013 |
| LR-SR-ADP-027 Assessment of Steel Hatch Covers Using Finite Element Analysis | July, 2024 |
| LR-SR-ADP-028 ShipRight Procedure ADP General Approval of Loading Computer Software - Strength Aspects | July, 2024 |
| LR-SR-ADP-029 Specific Ship Approval of Loading Computer Software - Strength Aspects | July, 2024 |
| LR-SR-ADP-030 Approval for Container Securing Software Programs | June, 2023 |
| LR-SR-ADP-031 Portable Energy Storage Units | June, 2025 |
| LR-SR-ADP-032 Procedure for Roll Design Assessment | July, 2025 |